With the strong assistance of our adept professionals, we are engrossed in supplying a large variety of Feeder Pillar Panel. The offered panel is Integrated with power distribution/metering/protection/control/reactive power compensation function. This panel is extensively used in commercial and residential sectors for low voltage distribution applications. Before offering to the clients, this panel is stringently tested in order to ensure its flawless performance. Comply with standard IEC 60439
a) Air temperature: Maximum temperature: +40℃; Minimum temperature:-25℃
b) Humidity: Monthly average humidity 95%; Daily average humidity 90% .
c) Altitude above sea level: Maximum installation altitude: 2500m
d) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
e) No frequent violent shake
No | Description | Unit | Data |
---|---|---|---|
1 | Busbar Rating | A | 630 |
2 | Metal used for busbars | Copper | |
3 | Type of protection | Tinned Plating | |
length x width x thickness | mm | 660 x 50x 5 | |
5 | Method of connection | Bolted Type | |
6 | Fixing centre of HRC fuse | mm | 90 |
7 | Are safety barriers fitted between phases of the same incoming or outgoing unit? | Yes | |
8 | Are insulating shields fitted betweenadjacent units? | No | |
9 | Minimum clearance between the lowestcable connection and ground level | mm | 300 |
10 | Material used for housing | Hot DippedGalvanized Sheet | |
11 | Treatment of housing against atmosphericcorrosion | 7 Tank Process | |
12 | Padlocking facility on housing door | Yes | |
13 | Weight of complete pillar | kg | 200 |